Tag Archives: motor gear box

China high quality No Noise Environmental Protection Supporting S Series Helical Gear Hard Tooth Surface CZPT Shaft Motor Gear Box cycloidal gearbox

Product Description

Boqiang Drive K Series Helical -Bevel Geared Motor

Features:
-High efficiency: 92%-97%;
-Compact structure: Small offset output, two stage and three stage are in the same box.
-High precision: the gear is made of high-quality alloy steel forging, carbonitriding and hardening treatment, grinding process to ensure high precision and stable running.
-High interchangeability: highly modular, serial design, strong versatility and interchangeability.

Technical parameters

Ratio	3.41-289.74
Input power	0.12-160KW
Output torque	61-23200N.m
Output speed	5-415rpm
Mounting type	Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, CHINAMFG flange mounted, Flange-mounted with extended bearing hub
Input Method	Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release	HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor	TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch)
Mounting Position	M1, M2, M3, M4, M5, M6
Type	R17-R167
Output shaft dis.	20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material	HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material	HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology	carbonitriding and hardening treatment
Efficiency	92%-97%
Lubricant	VG220
Protection Class	IP55, F class

Product Parameters

Models	Output Shaft Dia.	Input Shaft Dia.	Power(kW)	Ratio	Max. Torque(Nm)
R/RF18	20mm	–	0.18~0.75	3.83~74.84	85
R/RF28	25mm	16mm	0.18~3	3.37~135.09	130
R/RF38	25mm	16mm	0.18~3	3.41~134.82	200
R/RF48	30mm	19mm	0.18~5.5	3.83~176.88	300
R/RF58	35mm	19mm	0.18~7.5	4.39~186.89	450
R/RF68	35mm	19mm	0.18~7.5	4.29~199.81	600
R/RF78	40mm	24mm	0.18~11	5.21~195.24	820
R/RF88	50mm	28mm	0.55~22	5.36~246.54	1550
R/RF98	60mm	38mm	0.55~30	4.49~289.6	3000
R/RF108	70mm	42mm	2.2~45	5.06~245.5	4300
R/RF138	90mm	55mm	5.5~55	5.51~223.34	8000
R/RF148	110mm	55mm	11~90	5.00~163.46	13000
R/RF168	120mm	70mm	11~160	8.77~196.41	18000

1 Stage

Models	Output Shaft Dia.	Input Shaft Dia.	Power(kW)	Ratio	Max. Torque(Nm)
RX/RXF38	20mm	16mm	0.18~1.1	1.6~3.76	20
RX/RXF58	20mm	19mm	0.18~5.5	1.3~5.5	70
RX/RXF68	25mm	19mm	0.18~7.5	1.4~6.07	135
RX/RXF78	30mm	24mm	1.1~11	1.42~5.63	215
RX/RXF88	40mm	28mm	3~22	1.39~6.44	400
RX/RXF98	50mm	38mm	5.5~30	1.42~5.82	600
RX/RXF108	60mm	42mm	7.5~45	1.44~6.65	830
RX/RXF128	75mm	55mm	7.5~90	1.56~6.47	1110
RX/RXF158	90mm	70mm	11~132	1.63~6.22	1680

R series gear units are available in the following designs:

1.R.. Y.. Foot shaft extension mounted helical gear reducer

2.RF.. Y.. Flange shaft extension mounted helical gear reducer

3.R.. R.. Y.. Base shaft extension mounted combined helical gear reducer

4.RF.. R.. Y.. Flange shaft extension mounted combined helical gear reducer

5.R.. AD.. Foot shaft extension installation, shaft input helical gear reducer

6.RF.. AD.. Flange axial extension type installation, shaft input helical gear reducer

7.R.. R.. AD.. Foot shaft extension mounted combined, shaft input helical gear reducer

8.RF.. R.. Y.. Flange shaft extension mounted combined, shaft input helical gear reducer

9.R or RF.. P or SF.. Coupling flange input type helical gear reducer (used when the motor user is equipped with or equipped with special motors)

Mounting poKition:
PoKition of the motor thermal box:

Input power rating and permissible torque:

Gear unit weight:
Photos of the factory area

ZHangZhoug Boqiang Transmission Co., Ltd. was established in 2002 and is a high-tech enterprise that integrates design, development, manufacturing, and operation, producing and selling reduction motors and power transmission equipment. The company is located in Oubei Town, HangZhoua County, at the forefront of national reform and opening up, known as the “Little Xihu (West Lake) Dis.” of HangZhou. Close to National Highway 104 and east to HangZhou International Airport and Xihu (West Lake) Dis. International Container Terminal; South to HangZhou Railway Station and Passenger Transport Center; There are also many national tourist attractions such as Yandang Mountain and Xihu (West Lake) Dis. River. With convenient transportation and unique geographical location, it is highly welcomed by domestic and foreign users.
Our company produces 12 series of helical gear reducers for various purposes, including shaft mounted helical gear reducers, helical bevel gear reducers, helical worm gear reducers, spiral bevel gear steering boxes, worm gear reducers, continuously variable transmissions, spiral elevators, and large gearboxes. The power coverage is 0.12-2000kw, with a reduction ratio of 1.25-30000. Various combinations, deformations, and specialized products can meet most industrial requirements. The R, K, F, and S series reducers adopt the modular design principle of unit structure, greatly reducing the types of components and inventory, and greatly shortening the delivery cycle. The components have strong universality and low maintenance costs.

Boqiang has a leading position in China in terms of technology level and product market share. The products are widely used in various fields such as metallurgy, light industry, packaging, medicine, petroleum, chemical industry, lifting and transportation, three-dimensional parking, printing and dyeing, elevators, wind power, etc. Boqiang Company has excellent performance. The transmission technology experts from the headquarters and numerous application engineers and after-sales service technicians from various regional offices provide you with rapid and comprehensive technical consultation and comprehensive services.

Looking back at the past and looking CHINAMFG to the future, Boqiang has always been on the way forward, constantly improving and surpassing itself with high-quality products and comprehensive services, and winning the favor of the market and customers. We are willing to work together with people of insight from all walks of life to create a more brilliant tomorrow.
Processing equipment
Testing equipment and quality control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

Supporting equipment

Packaging And Transportation

FAQ
Q1: I want to buy your products, how can I pay?
A: You can pay via T/T(30%+70%), L/C ,D/P etc.

Q2: How can you guarantee the quality?
A: One year’s warranty against B/L date. If you meet with quality problem, please send us pictures or video to check, we promise to send spare parts or new products to replace. Our guarantee not include inappropriate operation or wrong specification selection.

Q3: How we select models and specifications?
A: You can email us the series code (for example: RC series helical gearbox) as well as requirement details, such as motor power,output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings,it is nice.

Q4: If we don’t find what we want on your website, what should we do?
A: We offer 3 options:
1, You can email us the pictures, drawings or descriptions details. We will try to design your products on the basis of our
standard models.
2, Our R&D department is professional for OEM/ODM products by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
3, We can develop new products if they have good market. We have already developed many items for special using successful, such as special gearbox for agitator, cement conveyor, shoes machines and so on.

Q5: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q6: How about your product delivery time?
A: Normally for 20’container, it takes 25-30 workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty:	a Year
Type:	Worm Helical Gear
Automation:	Automation
Certification:	CE, RoHS, ISO9001: 2000
Input Power:	0.12-200kw
Step:	Single-Step

Customization:	Available \| Customized Request

worm gearbox

Can a Worm Gearbox be Used for High-Speed Applications?

Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:

Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.

While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.

worm gearbox

Worm Gearbox Applications in Robotics and Automation

Worm gearboxes play a crucial role in various robotics and automation applications due to their unique characteristics and benefits. Here are some common applications where worm gearboxes are used:

Robotic Arm Movement: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
Conveyor Systems: In automated production lines, worm gearboxes are used to drive conveyor belts and move materials or products along assembly lines with accuracy.
Precision Positioning: Worm gearboxes are used in precision positioning systems, such as those found in pick-and-place robots and CNC machines. They ensure accurate and repeatable movements.
Pan and Tilt Mechanisms: Worm gearboxes are utilized in pan and tilt mechanisms of surveillance cameras, robotic cameras, and sensors. The self-locking feature helps stabilize and maintain the desired angle.
Automated Gates and Doors: Worm gearboxes are used in automated gate and door systems to control their opening and closing movements smoothly and safely.
Material Handling: Robots in warehouses and distribution centers use worm gearboxes to manipulate and lift objects, enhancing efficiency in material handling.
Medical Robotics: Worm gearboxes are employed in medical robots for surgical procedures, diagnostic equipment, and rehabilitation devices, ensuring precise and controlled movements.
Industrial Robots: Industrial robots rely on worm gearboxes for various tasks, including welding, painting, assembly, and packaging, where precise movements are essential.
Automated Testing Equipment: In testing and inspection applications, worm gearboxes provide the necessary movement and positioning for accurate testing and measurements.
Food and Beverage Industry: Worm gearboxes are used in automated food processing and packaging systems, ensuring hygienic and precise movement of products.

Worm gearboxes are preferred in these applications due to their compact size, high torque output, self-locking feature, and ability to provide a right-angle drive. However, selecting the right gearbox requires considering factors such as load, speed, efficiency, and environmental conditions.

worm gearbox

What is a Worm Gearbox and How Does It Work?

A worm gearbox, also known as a worm gear reducer, is a mechanical device used to transmit rotational motion and torque between non-parallel shafts. It consists of a worm screw and a worm wheel, both of which have helical teeth. The worm screw resembles a threaded cylinder, while the worm wheel is a gear with teeth that mesh with the worm screw.

The working principle of a worm gearbox involves the interaction between the worm screw and the worm wheel. When the worm screw is rotated, its helical teeth engage with the teeth of the worm wheel. As the worm screw rotates, it translates the rotational motion into a perpendicular motion, causing the worm wheel to rotate. This perpendicular motion allows the worm gearbox to achieve a high gear reduction ratio, making it suitable for applications that require significant speed reduction.

One of the key features of a worm gearbox is its ability to provide a high gear reduction ratio in a compact design. However, due to the sliding nature of the meshing teeth, worm gearboxes may exhibit higher friction and lower efficiency compared to other types of gearboxes. Therefore, they are often used in applications where efficiency is not the primary concern but where high torque and speed reduction are essential, such as conveyor systems, elevators, automotive steering systems, and certain industrial machinery.

China high quality No Noise Environmental Protection Supporting S Series Helical Gear Hard Tooth Surface CZPT Shaft Motor Gear Box cycloidal gearbox
editor by CX 2024-04-04

China high quality S Series High Torque 10kw AC Gear Motor Helical Gear Box Speed Reducer Worm Reduction Gearbox gearbox assembly

Product Description

S series helical gear speed reducer helical bevel speed reducer

Product Description

S series is 1 kind of Helical worm gearbox ,designed as Modularization and high-stainless cast iron case . It is combination of helical gear and worm gear ,which with higher efficiency and strength than simple aluminum worm gearbox . Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements. The gear ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications.

Product Parameters

1) Output speed: 0.6~1,571r/min

2) Output torque: up to 4530N.m

3) Motor power: 0.12~22kW

4) Mounted form: foot-mounted and flange-mounted mounting

Packaging & Shipping

Shipping: By sea, by air or others.

Packaging Details: The normal package is wooden box or pack it according to customers special request.

FAQ

1.What information should I tell you to confirm the worm gearbox?
A:Model/Size,B:Ratio and output torque, C:Powe and flange type,D:Shaft Direction,E:Housing color,F:Order quantity.

2.What type of payment methods do you accept?
T/T

3.What’s your warranty?
One year.

4.How to delivery?
A:By sea- Buyer appoints forwarder,or our sales team finds suitable forwarder for buyers.By air- Buyer offers collect express account,or our sales team finds suitable express for buyers.(Mostly for sample) Other- We arrange to delivery goods to some place in China appointed by buyers.

5.Can you make OEM/ODM order?
Yes,we have rich experience on OEM/ODM order
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

Customization:	Available \| Customized Request

worm gearbox

Common Problems and Troubleshooting for Worm Gearboxes

Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:

Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
Noise and Vibration: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
Backlash: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.

If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.

worm gearbox

Worm Gearboxes in Conveyor Systems: Benefits and Considerations

Worm gearboxes play a crucial role in conveyor systems, offering several benefits and considerations for their effective integration:

Space Efficiency: Worm gearboxes have a compact design, making them suitable for applications with limited space, such as conveyor systems.
High Reduction Ratios: Worm gearboxes can achieve high reduction ratios in a single stage, allowing for slower conveyor speeds without sacrificing torque.
Self-Locking: Worm gearboxes have inherent self-locking properties, preventing the conveyor from moving when the motor is not actively driving it.
Directional Control: Worm gearboxes facilitate directional control, enabling the conveyor to move forward or reverse as needed.
Low Noise: Worm gearboxes often produce lower noise levels compared to other gearbox types, contributing to quieter conveyor operation.

However, there are also considerations to keep in mind when using worm gearboxes in conveyor systems:

Efficiency: Worm gearboxes may have lower mechanical efficiency compared to some other gearbox types, leading to energy losses.
Heat Generation: Worm gearboxes can generate more heat due to sliding contact between the worm and gear, necessitating proper cooling mechanisms.
Lubrication: Proper lubrication is critical to prevent wear and ensure efficient operation. Regular maintenance is required to monitor lubrication levels.
Load and Speed: Worm gearboxes are well-suited for applications with high torque and low to moderate speed requirements. They may not be optimal for high-speed conveyors.

Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.

worm gearbox

What is a Worm Gearbox and How Does It Work?

China high quality S Series High Torque 10kw AC Gear Motor Helical Gear Box Speed Reducer Worm Reduction Gearbox gearbox assembly
editor by CX 2024-03-07

China OEM 12V 80W Small DC Motor Worm Gear Box Manufactures sequential gearbox

Product Description

12v 80w Small DC Motor Worm Gear Box Manufactures

Diameter of the output shaft can be 6mm, 8mm, 10mm and 12mm.

Products Code	Voltage (V)	Power (W)	No load		Load			Gear ratio	Motor length (mm)
Products Code	Voltage (V)	Power (W)	Speed (rpm)	Current (A)	Speed (rpm)	Current (A)	Torque (N.m)	Gear ratio	Motor length (mm)
D63L(72)-4830-15	48	30	15±2	≤0.6	12±2	≤3.5	≥5.0	82:1	88
D63L(72)-2445-60	24	45	60±3	≤0.8	55±3	≤4.5	≥6.0	82:1	88
D63L(72)-1280-40	12	80	40±3	≤1.2	32±3	≤8.0	≥8.0	82:1	88
D63L(72)-4830-120	48	30	120±5	≤0.6	110±5	≤6.5	≥6.5	82:1	88
D63L(72)-2445-100	24	45	100±5	≤0.8	95±5	≤5.5	≥7.0	82:1	88
D63L(72)-1280-95	12	80	95±5	≤1.2	90±5	≤6.0	≥8.0	82:1	88

More Application:
Welding machine, electrical household, CHINAMFG machinery, office intelligent equipment, hotel leisure, automated machine etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Universal, Industrial, Household Appliances, Car, Power Tools, Auto Garage Door Opener
Operating Speed:	Low Speed
Excitation Mode:	Brush

Samples:	US$ 150/Piece 1 Piece(Min.Order) \| Order Sample Sample fee will be returned when order reaches 200

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

worm gearbox

Calculating Gear Ratio in a Worm Reducer

The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:

Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft

For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.

It’s important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system’s ability to resist backdriving.

When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.

worm gearbox

Does a Worm Reducer Require Frequent Maintenance?

Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:

Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.

While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.

worm gearbox

Advantages of Using a Worm Reducer in Mechanical Systems

Worm reducers offer several advantages that make them suitable for various mechanical systems:

High Gear Reduction Ratio: Worm gearboxes provide significant speed reduction, making them ideal for applications that require a high gear reduction ratio without the need for multiple gears.
Compact Design: Worm reducers have a compact and space-saving design, allowing them to be used in applications with limited space.
Self-Locking: Worm gearboxes exhibit self-locking properties, which means that the worm screw can prevent the worm wheel from reversing its motion. This is beneficial for applications where the gearbox needs to hold a load in place without external braking mechanisms.
Smooth and Quiet Operation: Worm gearboxes operate with a sliding motion between the teeth, resulting in smoother and quieter operation compared to some other types of gearboxes.
High Torque Transmission: Worm gearboxes can transmit high torque levels, making them suitable for applications that require powerful torque output.
Heat Dissipation: The sliding action between the worm screw and the worm wheel contributes to heat dissipation, which can be advantageous in applications that generate heat during operation.
Stable Performance: Worm reducers offer stable and reliable performance, making them suitable for continuous operation in various industrial and mechanical systems.

Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.

China OEM 12V 80W Small DC Motor Worm Gear Box Manufactures sequential gearbox
editor by CX 2024-02-29

China high quality R F K S Series Parallel Shaft Inline Gear Box Speed Reducer Reducer Worm Bevel Helical Geared Motor Gearbox gearbox engine

Product Description

China K Series Spiral Bevel Geared Reducer for Electric Motor

Components:
1. Housing: Cast Iron
2. Gears: Helical-bevel Gears
3. Input Configurations: Equipped with Electric Motors, CHINAMFG Shaft Input, IEC-normalized Motor Flange
4. Applicable Motors: Single Phase AC Motor, Three Phase AC Motor, Brake Motors, Inverter Motors,
Multi-speed Motors, Explosion-proof Motor, Roller Motor
5. Output Configurations: CHINAMFG Shaft Output, Hollow Shaft Output

Models:
K Series – Foot-mounted, CHINAMFG shaft output
KAB Series – Foot-mounted, hollow shaft output
KA Series – Keyed hollow shaft output
KF Series – B5 Flange-mounted, CHINAMFG shaft output
KAF Series – B5 Flange-mounted, hollow shaft output
KAZ Series – B14 Flange-mounted, hollow shaft output
KAT Series – Hollow shaft output, torque arm
KH, KHB, KHF, KHZ Series – Hollow shaft output, shrink disk
KV, KVB, KVF, KVZ Series – Hollow shaft output, splined hollow shaft
K(KA, KF, KAF, KAB, KAZ)S Series – CHINAMFG shaft input

Product Advantages

K series gearbox is 1 kind of Helical Bevel type gearbox , High-stainless cast iron case,it is designed based on modularization,which bring many difference kinds of combinations ,mounting types ,and structure designs.

Product Name	K Series Helical Bevel Geared Motor speed reducer 3kw 4kw 5.5kw 7.5kw 11kw 15kw
Output configuration	CHINAMFG shaft, splined shaft
Mounted form	foot-mounted and flange-mounted mounting
Efficiency	High power density
Model	GK,GKF,GKA,GKAF,GKAZ,GKHF,GK37~GK187 etc.
Technology	CNC grinding technology
Application areas	Metallurgical machinery, food machinery,logistics and transportation and so on.

R series reducer has the characteristics of small volume and large torque transmission. It is designed and manufactured on the basis of modular combination system. There are many motor combinations,installation forms and structural schemes. R series reducer adopts the modular design principle of unit structure, with high transmission efficiency, low energy consumption and superior performance.

Product Description

Features of product

1.High transmission efficiency, stable operation, low noise
2.long service life, high bearing capacity

3.The ratio can meet various of working condition

4.Superior performance. Hard tooth surface gear use the high quality alloy steel.

Detailed Photos

Product Parameters

Models

Output Shaft Dia.

Input Shaft Dia.

Power(kW)

Ratio

Max. Torque(Nm)

Solid Shaft

Hollow Shaft

K38

25mm

30mm

16mm

0.18~3.0

5.36~106.38

200

K48

30mm

35mm

19mm

0.18~3.0

5.81~131.87

400

K58

35mm

40mm

19mm

0.18~5.5

6.57~145.15

600

K68

40mm

19mm

0.18~5.5

7.14~144.79

820

K78

50mm

24mm

0.37~11

7.22~192.18

1550

K88

60mm

28mm

0.75~22

7.19~197.27

2700

K98

70mm

38mm

1.3~30

8.95~175.47

4300

K108

90mm

42mm

3~45

8.74~141.93

8000

K128

110mm

100mm

55mm

7.5~90

8.68~146.07

13000

K158

120mm

70mm

11~160

12.66~150.03

18000

K168

160mm

140mm

70mm

11~200

17.35~164.44

32000

K188

190mm

160mm

70mm

18.5~200

17.97~178.37

50000

Our Advantages

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Motorcycle, Machinery, Agricultural Machine
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Expansion, Parallel
Gear Shape:	Bevel Gear
Step:	Single-Step

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Request Sample

worm gearbox

What are the Noise Levels Associated with Worm Gearboxes?

The noise levels associated with worm gearboxes can vary depending on several factors, including the design, quality, operating conditions, and maintenance of the gearbox. Here are some key points to consider:

Design and Quality: Well-designed and high-quality worm gearboxes tend to produce lower noise levels. Factors such as gear tooth profile, precision manufacturing, and proper alignment can contribute to reduced noise.
Gear Engagement: The way the worm and worm wheel engage and mesh with each other can impact noise levels. Proper tooth contact and alignment can help minimize noise during operation.
Lubrication: Inadequate or improper lubrication can lead to increased friction and wear, resulting in higher noise levels. Using the recommended lubricant and maintaining proper lubrication levels are important for noise reduction.
Operating Conditions: Operating the gearbox within its specified load and speed limits can help prevent excessive noise generation. Overloading or operating at high speeds beyond the gearbox’s capabilities can lead to increased noise.
Backlash: Excessive backlash or play between the gear teeth can lead to impact noise as the teeth engage. Proper backlash adjustment can help mitigate this issue.
Maintenance: Regular maintenance, including gear inspection, lubrication checks, and addressing any wear or damage, can help keep noise levels in check.

It’s important to note that while worm gearboxes can produce some noise due to the nature of gear meshing, proper design, maintenance, and operation can significantly reduce noise levels. If noise is a concern for your application, consulting with gearbox manufacturers and experts can provide insights into selecting the right gearbox type and implementing measures to minimize noise.

worm gearbox

Worm Gearbox vs. Helical Gearbox: A Comparison

Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let’s compare them:

Aspect	Worm Gearbox	Helical Gearbox
Efficiency	Lower efficiency due to sliding friction between the worm and worm wheel.	Higher efficiency due to rolling contact between helical gear teeth.
Torque Transmission	Excellent torque transmission and high reduction ratios achievable in a single stage.	Good torque transmission, but may require multiple stages for high reduction ratios.
Noise and Vibration	Generally higher noise and vibration levels due to sliding action.	Lower noise and vibration levels due to smoother rolling contact.
Backlash	Higher inherent backlash due to the design.	Lower backlash due to meshing of helical teeth.
Efficiency at Higher Speeds	Less suitable for high-speed applications due to efficiency loss.	More suitable for high-speed applications due to higher efficiency.
Overload Protection	Natural self-locking feature provides some overload protection.	May not have the same level of inherent overload protection.
Applications	Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery.	Widely used in various applications including automotive transmissions, industrial machinery, and more.

Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.

worm gearbox

How Does a Worm Gearbox Compare to Other Types of Gearboxes?

Worm gearboxes offer unique advantages and characteristics that set them apart from other types of gearboxes. Here’s a comparison between worm gearboxes and some other common types:

Helical Gearbox: Worm gearboxes have higher torque multiplication, making them suitable for heavy-load applications, while helical gearboxes are more efficient and offer smoother operation.
Bevel Gearbox: Worm gearboxes are compact and can transmit motion at right angles, similar to bevel gearboxes, but worm gearboxes have self-locking capabilities.
Planetary Gearbox: Worm gearboxes provide high torque output and are cost-effective for applications with high reduction ratios, whereas planetary gearboxes offer higher efficiency and can handle higher input speeds.
Spur Gearbox: Worm gearboxes have better shock load resistance due to their sliding motion, while spur gearboxes are more efficient and suitable for lower torque applications.
Cycloidal Gearbox: Cycloidal gearboxes have high shock load capacity and compact design, but worm gearboxes are more cost-effective and can handle higher reduction ratios.

While worm gearboxes have advantages such as high torque output, compact design, and self-locking capability, the choice between gearbox types depends on the specific requirements of the application, including torque, efficiency, speed, and space limitations.

China high quality R F K S Series Parallel Shaft Inline Gear Box Speed Reducer Reducer Worm Bevel Helical Geared Motor Gearbox gearbox engine
editor by CX 2024-02-26

China factory RV Worm Gear Box with Electric Motor gearbox assembly

Product Description

Why Choose Us

Product Details

Type	Worm Gear Speed Reducer/ gearbox
Model	WMRV 25/30/40/50/63/75/90/110/130/150/185
Ratio	7.5,10,15,20,25,30,40,50,60,80,100.
Color	Blue(RAL5571)/Silver grey (K9149) Or On Customer Request
Material	Housing: Aluminum alloy(size 25~90) / Cast iron(size 110~185)
	Worm wheel: Aluminum Bronze or Tin Bronze
	Worm shaft: 20CrMn Ti
	Output Shaft: steel-45#
Packing	Carton, Honey Comb Carton, Wooden Case with wooden pallet
Warranty	1 Year
Input Power	0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on.
Usages	Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass.
IEC Flange	IEC standard flange or on customer request
Lubricant	Synthetic oil or worm gear oil

Company Profile

Exhibition

Customized Service

Certificate&Honor

Customer Comments

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.

4. Do you sell motors?
We have stable motor suppliers who have been cooperating with us for a long-time. They can provide motors
with high quality.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Worm
Step:	Double-Step

Samples:	US$ 25/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

worm gearbox

Can a Worm Gearbox be Used for High-Speed Applications?

Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:

Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.

worm gearbox

Worm Gearbox vs. Helical Gearbox: A Comparison

Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let’s compare them:

Aspect	Worm Gearbox	Helical Gearbox
Efficiency	Lower efficiency due to sliding friction between the worm and worm wheel.	Higher efficiency due to rolling contact between helical gear teeth.
Torque Transmission	Excellent torque transmission and high reduction ratios achievable in a single stage.	Good torque transmission, but may require multiple stages for high reduction ratios.
Noise and Vibration	Generally higher noise and vibration levels due to sliding action.	Lower noise and vibration levels due to smoother rolling contact.
Backlash	Higher inherent backlash due to the design.	Lower backlash due to meshing of helical teeth.
Efficiency at Higher Speeds	Less suitable for high-speed applications due to efficiency loss.	More suitable for high-speed applications due to higher efficiency.
Overload Protection	Natural self-locking feature provides some overload protection.	May not have the same level of inherent overload protection.
Applications	Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery.	Widely used in various applications including automotive transmissions, industrial machinery, and more.

worm gearbox

Lubrication Requirements for a Worm Gearbox

Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:

Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.

Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.

China factory RV Worm Gear Box with Electric Motor gearbox assembly
editor by CX 2024-02-23

China manufacturer High Torque Cast Iron Shell Wp Wpa Wpo Series Gear Box Transmission DC Motor Worm Speed Reducer Small Engine Gearbox gearbox definition

Product Description

Factory high quality WP series 90 degree worm reduction gear box for electric motor

Features:
1. Different variants, both input and output shafts can be mounted horizontally or vertically

2. Compact structure

3. Direct drive or indirect drive available

4. Output could be CHINAMFG shaft or hollow hole

Product Parameters

Model Ratio

0.4

0.33

0.26

0.24

0.22

0.16

0.14

o.12

0.65

0.52

0.40

0.37

0.34

0.27

0.24

0.20

1.00

0.82

0.65

0.59

0.54

0.45

0.40

0.32

1.60

1.35

1.10

0.96

0.82

0.67

0.61

0.52

2.20

1.78

1.36

1.28

1.20

0.90

0.80

0.75

100

3.60

3.10

2.60

2.35

2.10

1.68

1.30

1.00

120

5.20

4.35

3.50

3.25

3.00

2.20

1.90

1.50

135

9.75

7.85

6.00

5.50

5.00

3.69

2.89

2.30

147

10.71

8.43

6.18

5.71

5.23

3.84

3.09

2.52

155

12.80

9.90

7.00

6.53

6.00

4.40

3.61

3.00

175

17.30

13.60

10.00

9.13

8.30

6.18

4.85

4.07

200

22.60

18.20

13.86

12.75

11.67

8.78

6.71

5.58

250

33.20

27.40

21.60

20.00

18.43

14.00

10.43

8.62

Product Description

(1)Worm gear reducer is a power transmission mechanism, the use of gear speed converter, the motor (motor) the number of rotation to slow down to the number of rotation, and get a larger torque mechanism. At present, the application of speed reducer is widely used in the mechanism of transmitting power and motion.

(2)In all kinds of mechanical transmission system can see traces of it, from the transport ships, automobiles, motorcycles, construction heavy machinery, industrial machinery processing equipment and automated production equipment, to the common daily life appliances, clocks and watches, and so forth. Its application from the transmission of large power, to a small load, the precision of the angle of transmission can be seen in the application, and in industrial applications, the reducer has a reduction and increase the torque function. So it is widely used in speed and torque conversion equipmen

The role of main reducer:

1, reduce speed and increase the output torque, torque output ratio of motor output by the deceleration ratio, but should pay attention to not exceed the speed reducer rated torque.
2, deceleration while reducing the load inertia, inertia is reduced to the square of the reduction ratio. We can look at the General Motors has a value of inertia.

Company Profile

Application:	Electric Cars, Motorcycle, Agricultural Machinery, Car, Power Transmission
Layout:	Three-Ring
Hardness:	Hardened Tooth Surface
Installation:	Torque Arm Type
Type:	Worm Gear Box
Input Speed:	1440rpm

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

worm gearbox

Is it Possible to Reverse the Direction of a Worm Gearbox?

Yes, it is possible to reverse the direction of a worm gearbox by changing the orientation of either the input or output shaft. However, reversing the direction of a worm gearbox can have some implications that need to be considered:

Efficiency: Reversing the direction of a worm gearbox can potentially affect its efficiency. Worm gearboxes are typically more efficient in one direction of rotation due to the design of the worm and worm wheel.
Backlash: Reversing the direction of rotation might lead to increased backlash or play in the gearbox, which can impact precision and smooth operation.
Lubrication: Depending on the gearbox’s design, reversing the direction could affect lubrication distribution and lead to uneven wear on the gear teeth.
Load: Reversing the direction might also impact the gearbox’s load-carrying capacity, especially if it’s designed for predominantly one-way operation.
Noise and Vibration: Direction reversal can sometimes result in increased noise and vibration due to changes in gear engagement and meshing behavior.

If you need to reverse the direction of a worm gearbox, it’s advisable to consult the gearbox manufacturer’s guidelines and recommendations. They can provide insights into whether the specific gearbox model is suitable for reversible operation and any precautions or adjustments needed to ensure proper functioning.

worm gearbox

How to Calculate the Efficiency of a Worm Gearbox

Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:

Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%

For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.

It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.

worm gearbox

Types of Worm Gear Configurations and Their Uses

Worm gear configurations vary based on the arrangement of the worm and the gear it engages with. Here are common types and their applications:

Single Enveloping Worm Gear: This configuration offers high torque transmission and efficiency. It’s used in heavy-duty applications like mining equipment and industrial machinery.
Double Enveloping Worm Gear: With increased contact area, this type provides higher load capacity and improved efficiency. It’s used in aerospace applications, robotics, and precision machinery.
Non-Throated Worm Gear: This type has a cylindrical worm without a throat. It’s suitable for applications requiring precise motion control, such as CNC machines and robotics.
Throated Worm Gear: Featuring a throat in the worm, this configuration offers smooth engagement and higher load capacity. It’s used in conveyors, elevators, and automotive applications.
Non-Modular Worm Gear: In this design, the worm and gear are a matched set, resulting in better meshing and efficiency. It’s utilized in various industries where customization is essential.
Modular Worm Gear: This type allows interchangeability of worm and gear components, providing flexibility in design and maintenance. It’s commonly used in conveyors, mixers, and material handling systems.

Selecting the appropriate worm gear configuration depends on factors such as load capacity, efficiency, precision, and application requirements. Consulting gearbox experts can help determine the best configuration for your specific needs.

China manufacturer High Torque Cast Iron Shell Wp Wpa Wpo Series Gear Box Transmission DC Motor Worm Speed Reducer Small Engine Gearbox gearbox definition
editor by CX 2023-09-21

China 2022 Worm Single Double Gear Speed Reducer Reductor Box Gearbox Green Motor Building Horizontal Torque double enveloping worm gearbox

Applicable Industries: Building Content Retailers, Producing Plant, Machinery Fix Shops, Farms, Energy & Mining
Weight (KG): fifty KG
Customized assistance: OEM, ODM, OBM
Gearing Arrangement: Worm
Output Torque: 1.8-2430N.M
Enter Velocity: 750-1500rpm
Output Pace: fourteen-280rpm
Port: ZheJiang

Specification

item	value
Applicable Industries	Building Materials Shops, Production Plant, Equipment Fix Stores, Farms, Vitality & Mining
Weight (KG)	50KG
Customized support	OEM, ODM, OBM
Gearing Arrangement	Worm
Output Torque	1.8-2430N.M
Input Velocity	750-1500rpm
Output Speed	14-280rpm
Place of Origin	JIA
Brand Name	YZ

Packing & Shipping To much better make sure the security of your products, skilled, environmentally welcoming, handy and effective packaging services will be provided. Firm Profile The business specializes in generation and income, automobile parts, oil extraction tools, equipment and tools FAQ 1. who are we?We are based in ZheJiang , China, begin from 2571,sell to South The us(ten.00%), KH90FLM11490 Mini Excavator Generate Sprocket Wheel Crawler Tracks thirteen KG Adhere to OEM Strictly FL Eastern Europe(ten.00%),Southeast Asia(10.00%),Western Europe(10.00%),Central America(ten.00%),Southern Europe(10.00%),Eastern Asia(8.00%),Domestic Market(8.00%),North The usa(5.00%),Africa(5.00%),South Asia(5.00%),Oceania(4.00%),Mid East(3.00%),Northern Europe(2.00%). There are overall about null men and women in our workplace.2. how can we promise high quality?Usually a pre-generation sample prior to mass productionAlways closing Inspection just before shipment3.what can you acquire from us?car,Engineering products,oil extraction products,automobile parts,Equipment4. why must you buy from us not from other suppliers?The company has abundant complex knowledge in the equipment market around the world, welcome consumers to check out and buy5. what companies can we supply?Acknowledged Shipping and delivery Phrases: FOB,CFR,CIF,EXW,FAS, Vehicle Timing Chain Motor Sprocket Timing Chain Xihu (West Lake) Dis. For AudiVWSKODA High High quality Timing Chain Areas & Package CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,GBP,CNY,CHFAccepted Payment Variety: T/T,L/C,D/P D/A,MoneyGram,Credit rating Card,PayPal,Western Union,Income, MAXFORD Bicycle Components Sprocket Large Freewheel 16t Bike Freewheel Components Solitary Pace Freewheel Biking Add-ons Areas EscrowLanguage Spoken:English

worm reducer

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducer AGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducer AGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China 2022 Worm Single Double Gear Speed Reducer Reductor Box Gearbox Green Motor Building Horizontal Torque double enveloping worm gearbox
editor by Cx 2023-06-19

China 1450rpm right angle gearbox wpa50 wps50 wpo50 wpx50 transmission gear box 50 reducer motor worm gear reducer buy

2023-06-16

China manufacturer best-selling small dc gear motor with 12volt plastic worm gear box for robot gearbox worm box

Relevant Industries: Accommodations, Garment Shops, Developing Material Stores, Machinery Fix Shops, Printing Stores, Strength & Mining, Advertising Firm
Fat (KG): .05 KG
Custom-made assistance: OEM, ODM
Gearing Arrangement: Helical
Output Torque: 2.6-1195N.m
Input Speed: 1000-3000rpm
Output Pace: 14-280rpm
Ratio: personalized
Sort: Reduction Motor
Packaging Specifics: 1.Export standerd carton/foam.2.Customized packing problem per your specifications

Product Variety:GB22-sixteen-MD18002-1-M GB22-24-MD18002-1-M GB22-36-MD18002-1-M GB22-64-MD18002-1-M GB22-ninety six-MD18002-1-M GB22-a hundred and forty four-MD18002-1-M GB22-216-MD18002-1-M GB22-256-MD18002-1-M GB22-384-MD18002-1-M GB22-576-MD18002-1-M GB22-864-MD18002-1-M GB22-1296-MD18002-1-MConstruction: Everlasting MagnetCommutation: BrushProtect Attribute: Drip-proofOutput Electrical power: 3WVoltage(V): 12V DCEfficiency: IE 1Motor dia.: 22mmGearbox dia.: 22mmGear ratio: 16-1296Material: PlasticOEM & ODM Service:Obtainable Gearmotor no load existing(MA):one hundred-120Gearmotor rated load torque(gf.cm):720-52780Gearmotor rated recent(MA):350Gearmotor rated load pace(rpm):418-5.1Noise (DB):<55Rotation:CW/CCW reversible Customized: Accepted Company Profile Establlished in 2002,HangZhou FORWA PrecisionPlastic Mould Co.,Ltd is a gear transmissionsolution provider ,We are ableto provide a seriesservices to our revered clients fromTransmission scheme. Main items:DC Gear MotorWorm Gear MotorPlanetary Equipment MotorPlastic and metal gearboxesprecise moldsplastic injection partsIn addition, customizing various gearboxesper necessity for our consumers is our specialty. Our CertificationWe obtained related certificates of ISO9001,ISO14001 and IATF16949 and numerous kinds patent certification. Our Support1.Pre-sale:Client manager 24 hours on-line support.Can reply inquiry within ten mins.2.In-sale:Generation method transparency and provide pictures and videos for productions approach and schedule.three.Following-sale:Shell out go to for customers often,enquire about customers’ satification statements,4.Quality: 3 times of quality checking from raw materials acquiring to finished item,100%inspection,high quality acceptance over 99%.

Types of Gearboxes Used in Wind Turbines

Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.
gearbox

Coaxial helical gearbox

The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CZPT can help you find it.
gearbox

Worm reduction gearbox

As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.

Stainless steel gearbox

Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CZPT Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CZPT Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CZPT Gear sales representative to find the perfect solution for your business.
gearbox

1 speed gearbox

Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.

China manufacturer best-selling small dc gear motor with 12volt plastic worm gear box for robot gearbox worm box
editor by czh

China Standard Professional manufacturer 25W Single Phase 220V AC motor speed gear reducer box + reducer near me manufacturer

Warranty: 1YEAR
Model Number: 4IK25RGN-C,4GN 15K
Type: Speed Control Motor
Frequency: 50Hz
Phase: Single-phase
Protect Feature: Drip-proof
AC Voltage: 220V/ 230 V
Efficiency: Ie 3
Current: 0.25A
Starting Torque: 88mN.m
Rated Torque: 47mN.m-190mN.m
Speed Control Range: 90-1350r/min
Capactior: 1.8μF
Gear Ratio: 3-200
Packaging Details: PACKING: CARTONS
Port: NingBo

Voltage
1ph 220V,1ph 230V,

Current
0.25A

Starting Torque
88mN.m

Allowance Torque
47mN.m-190mN.m

Speed Control Range
90-1350 R/min

Capactior
1.8μF

OutPower
25W

Gear Ratio
3-200

Manufacturing Technique Product packaging Exhibition FAQ Q1: Wonder if you accept small orders?A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.Q2: Can you send products to my country? A2: Sure, we can. If you do not BringSmart PG32-3157 12V DC Planetary Motor 80rpm Planet Motor 24V High Torque Long Life Planetary Reducer Motor have your own ship forwarder, we can help you. Q3: Can you do OEM for me?A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.Q4: What’s your payment terms ?A4: By T/T,LC AT SIGHT,30% deposit in advance, balance Haroi Good Selling SH8000 10000 12000 20kg Max Drag 550g worm shaft system Stainless Steel Saltwater Sea Water surf Reel 70% before shipment. Q5: How can I place the order?A5: First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.Q6: What information shall we give before placing a purchase order?A6: a)Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.b) Housing color.c) Purchase quantity.d) Other special requirements.Q7:How to choose a gearbox which meets our requirement?A7:You can refer to our catalogue to choose the gearbox or we can help to choose when you providethe technical information of required output torque, output speed and motor parameter etc.

The Different Types of Gearboxes

There are many different types of gearboxes. Some brands have more than one type. In this article, we’ll discuss the planetary gearbox, the worm reduction gearbox, the shaft mounted gearbox, and the one speed gearbox. This article will also help you determine which type of gearbox is best for your vehicle. And don’t worry if you don’t know the terminology yet. We’ll explain each type in detail so that you know what you’re getting yourself into.
gearbox

Planetary gearbox

Planetary gears have many advantages. The multiple gears in a planetary gearbox mesh simultaneously during operation. As such, they provide high efficiency and transmit high transmittable torque. These gears are widely used in various industries and are resistant to high shock loads and demanding conditions. CZPT is one of the companies that offer planetary gearboxes. Its products do not require special tools for assembly, and its scalable design minimizes safety stock.
Among the numerous benefits of planetary gearing is its compactness and lightweight. As such, it is suitable for wide applications with space and weight constraints. However, to truly appreciate its benefits, it is necessary to understand its mechanisms. Here are some of the most common details about planetary gearing:
The planetary gearbox has two mounted gears: an input shaft and an output shaft. Each gear has multiple teeth that are attached to a carrier and rotate with the input shaft. The carrier is connected to the output shaft. A planetary gear is mounted on both gears via a carrier. The carrier rotates in order to drive the planetary gear. The sun gear is often the input gear. The other gear is called the outer gear.
Planetary gearboxes are highly customizable. The size, mounting, and housing options vary, as do the reduction ratios and input speeds. Different types can be manufactured for different applications and include options such as electrical or mechanical preload. The final design of a planetary gearbox can be highly customized, based on the specifications of the application. By combining engineering excellence and ongoing innovation, planetary gearboxes provide years of trouble-free operation.
A planetary gearbox can be either an electric motor or a manual one. The latter has more features than the former, and can be used in applications where space is an issue. The primary features of a planetary gearbox include its backlash, torque, and ratio. Secondary features include noise, corrosion resistance, and construction. A planetary gearbox is a highly versatile gearbox that can drive anything from simple machinery to advanced electrical systems.
gearbox

Worm reduction gearbox

The global worm reduction gearbox market report compiles key insights from the industry to help you improve your business strategy. This report will help you create a comprehensive business document that will enhance your company’s competitive edge. To obtain this report, visit our website now! Read our latest report to find out what you can expect from the global worm reduction gearbox market. Alternatively, request a sample copy for more details. Here is a sneak peek of the report:
Worm gears are made with different thread counts and are usually not matched with the CZPT standard. In general, a single thread worm should be used with a single thread worm. Worm gears have either right or left threads, and their thread count will be different as well. This type of gear is used to reduce the speed of a rotating shaft. The speed reduction ratio will be about 50 percent if the worms have the same thread count as the CZPT gears.
The standard gear set transfers power at the peak load point of a tooth, called the pitchline. The worm gear moves slowly against the wheel’s metal surface. The worm gear is also more complex than the standard gear because the worm is sliding rather than rolling. Worm gears are hard to lubricate. Moreover, the sliding contact between the gear and worm increases the complexity of the gear set. They can be a great solution for applications where noise is a significant factor.
The axial pitch and circular pitch of the worm are equal. The ratio of these two indices determines the speed of transmission. For a worm reduction gearbox to work, the axial pitch and the circular pitch must match. The pitch angle of a worm can either be left-handed or right-handed. The lead of a worm is the distance one thread travels in one revolution. The lead angle is the angle tangent to the thread helix of the cylinder’s pitch. When a worm mesh is reversed, the majority of the mesh will be on the receding arc.
Worm gears generate more heat than their counterparts, so it is important to choose a worm reduction gearbox carefully. You will want to choose the material and amount of lubricating oil carefully. Worm gears are generally made of tin bronze. The paired worms are hardened to HRC45-55. In general, they are durable, lasting up to ten years. But they will wear out – and they wear out – so you may want to consider some other factors.

Shaft-mounted gearbox

Shaft-mounted gearboxes are designed for a variety of mining and quarry applications. Their high reliability and low maintenance make them an excellent choice in these types of applications. Shaft-mounted gearboxes also feature an optional backstop device that prevents the unit from rotating in one direction. This makes them an excellent choice for applications where alignment accuracy is an issue. Here are some of the benefits of using a shaft-mounted gearbox:
Shaft-mounted gearboxes are typically constructed of aluminium, and come in sizes ranging from 050 to 125. They feature a variety of reduction ratios and ensure optimum efficiency in all operating conditions. New S series sizes, 140 and 150, extend the application range of shaft-mounted gearmotors. They are both backed by a two-year warranty. For even greater peace of mind, Shaft-mounted gearboxes are available with a range of warranty options.
The most common applications for a Shaft-mounted gearbox include traction-driven applications where a low-speed shaft is required for operation. They also are suitable for applications without a foundation, where the motor is mounted next to the reducer. To prevent the gear drive from rotating, a torque arm is attached between the motor and the shaft. Small-sized shaft-mounted gear drives are usually made without motor mount kits, which can make them an excellent choice for conveying light loads.
Another important feature of a Shaft-mounted gearbox is its mounting position. The reduced motion through the drive is redirected through the shaft, creating additional forces. These additional forces can affect the performance of the gearbox, causing vibrations and noise. Consequently, it is important to replace worn or damaged belts on a regular basis. Further, shaft-mounted gearboxes can be affected by problems with other components and amplify vibrations.
gearbox

1 speed gearbox

CZPT Group Components produces one speed gearboxes. These transmissions are produced in the CZPT Group’s Kassel plant. They are compact and robust, and are designed for easy integration. The Bosch Rexroth GD1 one-speed gearbox is easy to install horizontally or vertically. The Plug and Drive system integrates the gearbox with the existing cooling system. There are many other benefits to this gearbox.
With an ID.3 electric drive motor, the maximum torque is delivered at 16,000 rpm. This single-speed transmission offers high power density and excellent noise-reduction, making it ideal for electric vehicles. The e-drive motor is extremely quiet and requires precision manufacturing. The e-drive motor also enables a wide range of driving conditions. It can reverse when needed, and reaches its maximum speed at 16,000.
The single-speed gearbox is a standard feature on most electric vehicles. Some electric vehicles, such as the Porsche Taycan, will be equipped with a two-speed gearbox. This gearbox offers more top speed and range, but it is more complex than a standard single-speed gearbox. CZPT doesn’t need to add complexity to its electric vehicles. After all, a 355 horsepower family wagon is not likely to need a dual-speed gearbox.
In addition to simplifying the transmission, the patent claims also address improvements in structural design. Fig. 5 shows a schematic representation of a transmission 50′, wherein gear sets Z1 and Z4 are exchanged between partial transmissions. This switch matrix also reflects the synchronized gears and lastshelf gears. Hydraulically betatigte Lamellenkupplungen (HBA) also form a last-shelf gear.
Another advantage of the patent claim is that it offers numerous functional freedoms, which is especially valuable in the design of an automobile. One of the patent claims identifies a tosatzlicher middle gear that allows a driver to switch between second and third gears, with a single gearbox. In a conventional one-speed transmission, the tosatzlicher middle gear is attached to the second and first part gearbox. The latter has a second and third gear.

China Standard Professional manufacturer 25W Single Phase 220V AC motor speed gear reducer box + reducer near me manufacturer