Tag Archives: worm gear reducer

China Right Angle Nmrv030-150 Worm Gear Series Transmission Gearbox for Motors worm gear reducer buy

Product Description

 

Item Description

Main Resources:
1)housing:aluminium alloy ADC12(size 571-090) die forged iron HT200(size 110-a hundred and fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment make gear floor hardness up to fifty six-62 HRC Right after precision grinding, carburization layer’s thickness in between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Thorough Photographs

Combination Alternatives:
Enter:with input shaft, With square flange,With IEC regular input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic cover
Worm reducers are offered with diffferent mixtures: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS

Exploded Look at:

Product Parameters

 
Previous Model     		   New Model     Ratio     Center Distance  Electrical power Input Dia.  Output Dia.    Output Torque Bodyweight
RV571     7.5~100   25mm   .06KW~.12KW  Φ9 Φ11 21N.m  .7kgs
RV030 RW030 seven.5~100 30mm   .06KW~.25KW Φ9(Φ11) Φ14 45N.m  one.2kgs
RV040 RW040 seven.5~a hundred 40mm   .09KW~.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 seven.5~a hundred 50mm   .12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~a hundred 63mm   .18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  six.2kgs
RV075 RW075 seven.5~a hundred 75mm   .25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 seven.5~100 90mm   .37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  thirteen.0kgs
RV110 RW110 7.5~100 110mm   .55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 seven.5~one hundred 130mm   .75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  forty eight.0kgs
RV150 RW150 seven.5~one hundred 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

GMRV Outline Dimension:

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 forty four 14 55 32 56 63 sixty five 29 55 40 57 thirty seventy five forty four six.five 21 five.5 M6*ten(n=4) 0° five sixteen.3 27
040 one hundred 121.five 70 sixty eighteen(19) sixty 43 71 seventy eight seventy five 36.five 70 50 seventy one.five forty 87 fifty five six.5 26 6.5 M6*ten(n=4) 45° six 20.8(21.8) 35
050 a hundred and twenty one hundred forty four eighty 70 25(24) 70 49 eighty five ninety two eighty five 43.five 80 sixty 84 50 100 sixty four eight.5 30 seven M8*12(n=4) 45° eight 28.3(27.3) 40
063 a hundred and forty four 174 one hundred eighty five 25(28) 80 sixty seven 103 112 ninety five fifty three 95 seventy two 102 63 110 eighty 8.five 36 eight M8*12(n=8) 45° 8 28.3(31.3) fifty
075 172 205 one hundred twenty 90 28(35) 95 72 112 a hundred and twenty 115 57 112.five 86 119 75 one hundred forty ninety three eleven forty 10 M8*14(n=8) 45° 8(ten) 31.3(38.3) sixty
090 206 238 a hundred and forty 100 35(38) 110 seventy four 130 140 130 sixty seven 129.5 103 one hundred thirty five 90 one hundred sixty 102 13 45 11 M10*16(n=8) 45° ten 38.3(forty one.3) 70
110 255 295 one hundred seventy 115 forty two a hundred thirty – one hundred forty four a hundred and fifty five 165 seventy four 160 127.five 167.5 110 200 a hundred twenty five fourteen 50 fourteen M10*eighteen(n=8) 45° 12 45.3 eighty five
one hundred thirty 293 335 200 120 45 one hundred eighty – a hundred and fifty five a hundred and seventy 215 81 179 146.five 187.five 130 250 140 16 sixty fifteen M12*twenty(n=8) 45° fourteen 48.8 100
one hundred fifty 340 four hundred 240 a hundred forty five 50 a hundred and eighty – 185 two hundred 215 96 210 one hundred seventy 230 a hundred and fifty 250 one hundred eighty 18 72.five eighteen M12*22(n=8) 45° 14 53.eight  120  

Firm Profile

About CZPT Transmission:
We are a professional reducer producer situated in HangZhou, ZHangZhoug province.
Our major merchandise is  full variety of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer models, UDL Variators and AC Motors, G3 helical gear motor.
Items are widely utilized for programs these kinds of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-producing, building equipment, metallurgic mine, environmental protection engineering, and all kinds of computerized strains, and assembly lines.
With rapidly supply, excellent following-income services, superior generating facility, our goods sell well  both at property and overseas. We have exported our reducers to Southeast Asia, Jap Europe and Middle East and so on.Our aim is to develop and innovate on basis of high good quality, and develop a good status for reducers.

 Packing info:Plastic Baggage+Cartons+Wooden Cases , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Get Eurasia 

Logistics

Soon after Revenue Services

1.Servicing Time and Guarantee:In 1 12 months after receiving products.
2.Other Provider: Such as modeling choice guide, installation guidebook, and problem resolution guidebook, etc.

FAQ

one.Q:Can you make as for each buyer drawing?
   A: Sure, we offer custom-made services for clients appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
   A: thirty% deposit prior to generation,equilibrium T/T prior to supply.
three.Q:Are you a trading company or maker?
   A:We are a manufacurer with advanced products and skilled personnel.
4.Q:What is your manufacturing potential?
   A:8000-9000 PCS/Thirty day period
5.Q:Totally free sample is obtainable or not?
   A:Sure, we can offer totally free sample if customer agree to shell out for the courier value
six.Q:Do you have any certificate?
   A:Sure, we have CE certificate and SGS certificate report.

Speak to info:
Ms Lingel Pan
For any queries just come to feel cost-free ton get in touch with me. Numerous many thanks for your kind consideration to our organization!

US $10-220
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
Old Model     		   New Model     Ratio     Center Distance  Power Input Dia.  Output Dia.    Output Torque Weight
RV025     7.5~100   25mm   0.06KW~0.12KW  Φ9 Φ11 21N.m  0.7kgs
RV030 RW030 7.5~100 30mm   0.06KW~0.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 7.5~100 40mm   0.09KW~0.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 7.5~100 50mm   0.12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~100 63mm   0.18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  6.2kgs
RV075 RW075 7.5~100 75mm   0.25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 7.5~100 90mm   0.37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 7.5~100 110mm   0.55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 7.5~100 130mm   0.75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  48.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

###

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 44 14 55 32 56 63 65 29 55 40 57 30 75 44 6.5 21 5.5 M6*10(n=4) 0° 5 16.3 27
040 100 121.5 70 60 18(19) 60 43 71 78 75 36.5 70 50 71.5 40 87 55 6.5 26 6.5 M6*10(n=4) 45° 6 20.8(21.8) 35
050 120 144 80 70 25(24) 70 49 85 92 85 43.5 80 60 84 50 100 64 8.5 30 7 M8*12(n=4) 45° 8 28.3(27.3) 40
063 144 174 100 85 25(28) 80 67 103 112 95 53 95 72 102 63 110 80 8.5 36 8 M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 120 90 28(35) 95 72 112 120 115 57 112.5 86 119 75 140 93 11 40 10 M8*14(n=8) 45° 8(10) 31.3(38.3) 60
090 206 238 140 100 35(38) 110 74 130 140 130 67 129.5 103 135 90 160 102 13 45 11 M10*16(n=8) 45° 10 38.3(41.3) 70
110 255 295 170 115 42 130 – 144 155 165 74 160 127.5 167.5 110 200 125 14 50 14 M10*18(n=8) 45° 12 45.3 85
130 293 335 200 120 45 180 – 155 170 215 81 179 146.5 187.5 130 250 140 16 60 15 M12*20(n=8) 45° 14 48.8 100
150 340 400 240 145 50 180 – 185 200 215 96 210 170 230 150 250 180 18 72.5 18 M12*22(n=8) 45° 14 53.8  120  
US $10-220
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
Old Model     		   New Model     Ratio     Center Distance  Power Input Dia.  Output Dia.    Output Torque Weight
RV025     7.5~100   25mm   0.06KW~0.12KW  Φ9 Φ11 21N.m  0.7kgs
RV030 RW030 7.5~100 30mm   0.06KW~0.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 7.5~100 40mm   0.09KW~0.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 7.5~100 50mm   0.12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~100 63mm   0.18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  6.2kgs
RV075 RW075 7.5~100 75mm   0.25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 7.5~100 90mm   0.37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 7.5~100 110mm   0.55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 7.5~100 130mm   0.75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  48.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

###

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 44 14 55 32 56 63 65 29 55 40 57 30 75 44 6.5 21 5.5 M6*10(n=4) 0° 5 16.3 27
040 100 121.5 70 60 18(19) 60 43 71 78 75 36.5 70 50 71.5 40 87 55 6.5 26 6.5 M6*10(n=4) 45° 6 20.8(21.8) 35
050 120 144 80 70 25(24) 70 49 85 92 85 43.5 80 60 84 50 100 64 8.5 30 7 M8*12(n=4) 45° 8 28.3(27.3) 40
063 144 174 100 85 25(28) 80 67 103 112 95 53 95 72 102 63 110 80 8.5 36 8 M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 120 90 28(35) 95 72 112 120 115 57 112.5 86 119 75 140 93 11 40 10 M8*14(n=8) 45° 8(10) 31.3(38.3) 60
090 206 238 140 100 35(38) 110 74 130 140 130 67 129.5 103 135 90 160 102 13 45 11 M10*16(n=8) 45° 10 38.3(41.3) 70
110 255 295 170 115 42 130 – 144 155 165 74 160 127.5 167.5 110 200 125 14 50 14 M10*18(n=8) 45° 12 45.3 85
130 293 335 200 120 45 180 – 155 170 215 81 179 146.5 187.5 130 250 140 16 60 15 M12*20(n=8) 45° 14 48.8 100
150 340 400 240 145 50 180 – 185 200 215 96 210 170 230 150 250 180 18 72.5 18 M12*22(n=8) 45° 14 53.8  120  

Worm gear reducer gearbox

Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm reducer

low clearance

A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm reducer

easy to replace

An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China Right Angle Nmrv030-150 Worm Gear Series Transmission Gearbox for Motors worm gear reducer buyChina Right Angle Nmrv030-150 Worm Gear Series Transmission Gearbox for Motors worm gear reducer buy
editor by czh 2023-01-05

China ISO 9001 Approved Worm Speed Gear Gearbox Reduction Gear Box Reducer (Nmrv) with high quality

Product Description

ISO 9001 Accredited Worm Velocity Gear Gearbox Reduction Gear Box Reducer (Nmrv)

Input Configurations

Double or one enter shaft (NRV)

PAM / IEC motor input shaft with circle or square flange (NMRV)

Output Configurations

 

Double or solitary output shaft

Output flange

Principal Characteristic

The gearbox can rotate in equally directions function and contains 1 oil filling at delivery.  you will reward from its substantial top quality and a quick delivery time.

Specification

Design

Motor Enter Flange (circle)

Transmission Ratio

Energy

(kw)

Ratio

(i)

Nominal Torque

(Nm)

PAM / IEC

Inner Dia.

Dis. Amongst Diagonal Screw Holes

External Dia.

Width of Crucial Slot

five

7.5

10

15

twenty

25

thirty

forty

fifty

60

eighty

a hundred

N

M

P

E

Diamter of Input Shaft

NMRV25

56B14

fifty

65

80

3

9

–

nine

–

.06

seven.5-sixty

2.6-14

NMRV30

63B5

95

one hundred fifteen

a hundred and forty

4

eleven

–

.06-.18

7.5-80

two.6-fourteen

63B14

sixty

75

ninety

56B5

eighty

100

one hundred twenty

3

9

–

56B14

fifty

65

eighty

NMRV40

71B5

110

one hundred thirty

a hundred and sixty

5

14

–

.09-.37

seven.5-100

11-53

71B14

70

eighty five

one hundred and five

63B5

ninety five

one hundred fifteen

140

four

eleven

63B14

60

seventy five

90

56B5

eighty

a hundred

one hundred twenty

three

–

9

NMRV50

80B5

a hundred thirty

165

two hundred

six

19

–

.twelve-.75

seven.5-a hundred

21-89

80B14

80

one hundred

120

71B5

110

130

160

5

14

–

71B14

70

eighty five

one zero five

63B5

ninety five

115

140

four

–

eleven

NMRV63

90B5

130

165

200

eight

24

–

.25-1.five

7.5-one hundred

fifty six-166

90B14

ninety five

a hundred and fifteen

a hundred and forty

80B5

one hundred thirty

165

two hundred

six

19

–

80B14

eighty

a hundred

120

71B5

one hundred ten

one hundred thirty

160

5

–

14

71B14

70

85

a hundred and five

NMRV75

one hundred/112B5

one hundred eighty

215

250

8

–

28

–

.fifty five-four

7.5-one hundred

ninety-269

one hundred/112B14

110

130

one hundred sixty

90B5

one hundred thirty

one hundred sixty five

200

8

24

–

90B14

ninety five

one hundred fifteen

140

80B5

130

a hundred sixty five

200

6

–

19

80B14

eighty

100

a hundred and twenty

71B5

a hundred and ten

a hundred thirty

160

–

–

fourteen

NMRV90

one hundred/112B5

a hundred and eighty

215

250

eight

–

28

–

.55-four

seven.5-a hundred

one zero one-458

a hundred/112B14

one hundred ten

one hundred thirty

one hundred sixty

90B5

130

one hundred sixty five

200

8

24

–

90B14

95

one hundred fifteen

a hundred and forty

80B5

a hundred thirty

a hundred sixty five

two hundred

6

–

19

80B14

80

one hundred

a hundred and twenty

NMRV110

132B5

230

265

three hundred

ten

–

38

–

one.1-7.5

seven.5-a hundred

242-660

132B14

one hundred thirty

165

two hundred

–

100/112B5

180

215

250

8

28

–

90B5

one hundred thirty

165

200

–

24

90B14

ninety five

one hundred fifteen

one hundred forty

–

80B5

130

165

200

–

19

 NMRV130 

132B5

230

265

three hundred

10

 – 

38

 – 

 2.2-7.5 

 7.5-100 

 333-1596 

132B14

a hundred thirty

one hundred sixty five

two hundred

–

one hundred/112B5

180

215

250

8

–

28

90B5

130

a hundred sixty five

200

–

–

24

90B14

95

one hundred fifteen

a hundred and forty

NMRV150

160B5

250

three hundred

350

12

–

42

–

two.2-fifteen

seven.5-100

570-1760

132B5

230

265

300

10

–

38

–

132B14

a hundred thirty

a hundred sixty five

200

–

one hundred/112B5

180

215

250

eight

–

28

Firm profile

Circumstance

Packing

FAQ

Q1: I want to purchase your goods, how can I spend?
A: You can pay out via T/T(30%+70%), L/C ,D/P and many others. 

Q2: How can you ensure the quality?
A: One year’s guarantee towards B/L day. If you satisfy with top quality dilemma, remember to send out us photos or movie to verify, we assure to ship spare components or new items to substitute. Our promise not consist of inappropriate operation or mistaken specification selection. 

Q3: How we decide on designs and technical specs?
A: You can electronic mail us the sequence code (for illustration: RC series helical gearbox) as properly as requirement information, this sort of as motor electricity,output velocity or ratio, support element or your software…as much knowledge as possible. If you can provide some pictures or drawings,it is nice. 

This fall: If we don’t locate what we want on your internet site, what ought to we do?
A: We supply 3 alternatives:
1, You can electronic mail us the images, drawings or descriptions details. We will try out to layout your products on the basis of our
regular designs.
2, Our R&D department is specialist for OEM/ODM items by drawing/samples, you can send out us samples, we do customized design for your bulk purchasing.
three, We can create new items if they have good marketplace. We have currently designed many items for special utilizing profitable, such as particular gearbox for agitator, cement conveyor, sneakers devices and so on. 

Q5: Can we acquire 1 personal computer of each item for good quality testing?
A: Sure, we are happy to accept trial order for good quality testing.

Q6: How about your item supply time?
A: Typically for 20’container, it normally takes twenty five-thirty workdays for RV collection worm gearbox, 35-40 workdays for helical gearmotors.

US $18-35
/ Piece
| 		20 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: B3,B6,B7,B8,V5,V6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|

Customized Request

###

Input Configurations
Double or single input shaft (NRV)
PAM / IEC motor input shaft with circle or square flange (NMRV)
Output Configurations
 
Double or single output shaft
Output flange

###

Model
Motor Input Flange (circle)
Transmission Ratio
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
PAM / IEC
Internal Dia.
Dis. Between Diagonal Screw Holes
External Dia.
Width of Key Slot
5
7.5
10
15
20
25
30
40
50
60
80
100
N
M
P
E
Diamter of Input Shaft
NMRV25
56B14
50
65
80
3
9
–
9
–
0.06
7.5-60
2.6-14
NMRV30
63B5
95
115
140
4
11
–
0.06-0.18
7.5-80
2.6-14
63B14
60
75
90
56B5
80
100
120
3
9
–
56B14
50
65
80
NMRV40
71B5
110
130
160
5
14
–
0.09-0.37
7.5-100
11-53
71B14
70
85
105
63B5
95
115
140
4
11
63B14
60
75
90
56B5
80
100
120
3
–
9
NMRV50
80B5
130
165
200
6
19
–
0.12-0.75
7.5-100
21-89
80B14
80
100
120
71B5
110
130
160
5
14
–
71B14
70
85
105
63B5
95
115
140
4
–
11
NMRV63
90B5
130
165
200
8
24
–
0.25-1.5
7.5-100
56-166
90B14
95
115
140
80B5
130
165
200
6
19
–
80B14
80
100
120
71B5
110
130
160
5
–
14
71B14
70
85
105
NMRV75
100/112B5
180
215
250
8
–
28
–
0.55-4
7.5-100
90-269
100/112B14
110
130
160
90B5
130
165
200
8
24
–
90B14
95
115
140
80B5
130
165
200
6
–
19
80B14
80
100
120
71B5
110
130
160
–
–
14
NMRV90
100/112B5
180
215
250
8
–
28
–
0.55-4
7.5-100
101-458
100/112B14
110
130
160
90B5
130
165
200
8
24
–
90B14
95
115
140
80B5
130
165
200
6
–
19
80B14
80
100
120
NMRV110
132B5
230
265
300
10
–
38
–
1.1-7.5
7.5-100
242-660
132B14
130
165
200
–
100/112B5
180
215
250
8
28
–
90B5
130
165
200
–
24
90B14
95
115
140
–
80B5
130
165
200
–
19
 NMRV130 
132B5
230
265
300
10
 – 
38
 – 
 2.2-7.5 
 7.5-100 
 333-1596 
132B14
130
165
200
–
100/112B5
180
215
250
8
–
28
90B5
130
165
200
–
–
24
90B14
95
115
140
NMRV150
160B5
250
300
350
12
–
42
–
2.2-15
7.5-100
570-1760
132B5
230
265
300
10
–
38
–
132B14
130
165
200
–
100/112B5
180
215
250
8
–
28
US $18-35
/ Piece
| 		20 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: B3,B6,B7,B8,V5,V6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|

Customized Request

###

Input Configurations
Double or single input shaft (NRV)
PAM / IEC motor input shaft with circle or square flange (NMRV)
Output Configurations
 
Double or single output shaft
Output flange

###

Model
Motor Input Flange (circle)
Transmission Ratio
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
PAM / IEC
Internal Dia.
Dis. Between Diagonal Screw Holes
External Dia.
Width of Key Slot
5
7.5
10
15
20
25
30
40
50
60
80
100
N
M
P
E
Diamter of Input Shaft
NMRV25
56B14
50
65
80
3
9
–
9
–
0.06
7.5-60
2.6-14
NMRV30
63B5
95
115
140
4
11
–
0.06-0.18
7.5-80
2.6-14
63B14
60
75
90
56B5
80
100
120
3
9
–
56B14
50
65
80
NMRV40
71B5
110
130
160
5
14
–
0.09-0.37
7.5-100
11-53
71B14
70
85
105
63B5
95
115
140
4
11
63B14
60
75
90
56B5
80
100
120
3
–
9
NMRV50
80B5
130
165
200
6
19
–
0.12-0.75
7.5-100
21-89
80B14
80
100
120
71B5
110
130
160
5
14
–
71B14
70
85
105
63B5
95
115
140
4
–
11
NMRV63
90B5
130
165
200
8
24
–
0.25-1.5
7.5-100
56-166
90B14
95
115
140
80B5
130
165
200
6
19
–
80B14
80
100
120
71B5
110
130
160
5
–
14
71B14
70
85
105
NMRV75
100/112B5
180
215
250
8
–
28
–
0.55-4
7.5-100
90-269
100/112B14
110
130
160
90B5
130
165
200
8
24
–
90B14
95
115
140
80B5
130
165
200
6
–
19
80B14
80
100
120
71B5
110
130
160
–
–
14
NMRV90
100/112B5
180
215
250
8
–
28
–
0.55-4
7.5-100
101-458
100/112B14
110
130
160
90B5
130
165
200
8
24
–
90B14
95
115
140
80B5
130
165
200
6
–
19
80B14
80
100
120
NMRV110
132B5
230
265
300
10
–
38
–
1.1-7.5
7.5-100
242-660
132B14
130
165
200
–
100/112B5
180
215
250
8
28
–
90B5
130
165
200
–
24
90B14
95
115
140
–
80B5
130
165
200
–
19
 NMRV130 
132B5
230
265
300
10
 – 
38
 – 
 2.2-7.5 
 7.5-100 
 333-1596 
132B14
130
165
200
–
100/112B5
180
215
250
8
–
28
90B5
130
165
200
–
–
24
90B14
95
115
140
NMRV150
160B5
250
300
350
12
–
42
–
2.2-15
7.5-100
570-1760
132B5
230
265
300
10
–
38
–
132B14
130
165
200
–
100/112B5
180
215
250
8
–
28

Worm gear reducer

Cheaper than planetary gearboxes In many cases, worm gear reducers are a popular alternative to planetary gearboxes. A worm gear reducer is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducers are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm_reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer to reduce vibration without damaging the output shaft.
Compact worm gear reducers are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducers are ideal for applications that require precision, repeatability, and efficient performance. These reducers are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducers through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducers are more efficient than their counterparts.
The high-efficiency worm reducer is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducers include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducers can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm_reducer

low clearance

A low-clearance worm reducer is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducers can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducers are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducers are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducers are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducers can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm_reducer

easy to replace

An easily replaceable worm gear reducer can save you a lot of money. A worm gear reducer is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducers can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducers offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducers is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducers are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer for your equipment.
When replacing the worm gear reducer, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China ISO 9001 Approved Worm Speed Gear Gearbox Reduction Gear Box Reducer (Nmrv) with high quality China ISO 9001 Approved Worm Speed Gear Gearbox Reduction Gear Box Reducer (Nmrv) with high quality
editor by czh 2022-11-26

China wholesaler Hot Sales Wpa Transmission Horizontal Vertical Worm Gear Reducer near me factory

Product Description

SC Transmission Very hot revenue WPA transmission
horizontal vertical worm gear reducer

Introductions of WP Series Worm Gearbox

WP Worm gearbox is designed on the basis of WD Worm gearbox for electric powered motor.
 

The worm is made of forty five# high-high quality steel by heat treatment method. The worm wheel is manufactured of tin bronze. The use resistance is very good, specially in the bearing potential. This kind gearbox is mostly utilized for the reduction transmission of various mechanical equipments such as plastics, metallurgy, beverages, mining, lifting and transportation, and chemical development.

For sector apps that desire reliable velocity reduction at a substantial vitality effectiveness, worm gearbox for electrical motor supply a best solution. We carry worm gearbox for electric motor merchandise in double reduction, solitary reduction and worm-helical sorts for versatile functionality, excellent overall performance.

Specs

one,Small machine condition, mild fat, without the use of shaft coupling, chain, sprockets and other transmission components.
2,The space is tiny, the input shaft is mounted straight to the equipment facet, can successfully preserve place.
three,Reduced expense. Owing to the immediate set up, without transmission areas, assembly time can be reduced, in common, can decrease the cost of.
four,Effortless set up, secure procedure, lengthy provider lifestyle, large carrying potential. Because of immediate docking and motor set up, can fully stop contact transmission areas, does not want a basic safety go over which can make sure the protection.

Application Scope

WP gear reducer sequence are extensively utilised in foodstuff, leather, glass, ceramics, metallurgy, mining, lifting, transportation, cement, design, chemical, textile, printing and dyeing, pharmaceutical and other gear
Manufacture for WP worm gearbox single worm gearbox, double worm gearbox, universal worm gearbox. And Screw jack reducer.

 

Applicable Industries:  Manufacturing Plant, Food & Beverage Factory, Energy & Mining
Gearing Arrangement:                                               Worm       
Output Torque:  170-291
Input Speed:  1500 rpm (according to motor)     
Output Speed: 25 -300
Place of Origin:                               China   
Housing Material:                                              Die-cast iron
Heat treatment:                                 Carburizing & Quenching               
Applicable Industries:  Manufacturing Plant, Food & Beverage Factory, Energy & Mining
Gearing Arrangement:                                               Worm       
Output Torque:  170-291
Input Speed:  1500 rpm (according to motor)     
Output Speed: 25 -300
Place of Origin:                               China   
Housing Material:                                              Die-cast iron
Heat treatment:                                 Carburizing & Quenching               

A-Drive PWC single worm reducer

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducers. As a result, worm gears continue to be popular with engineers.
worm_reducer

Agknx driver

Conical drive worm reducers are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducers are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm Reducer Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducers are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducers are ideal for a variety of applications.
RV series worm gear reducer is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducers have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducers are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm_reducerAGknx Single

Worm reducers can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducers work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducers have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducers can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducers are also susceptible to thermal stress. They run hotter than hypoid reducers, which reduces their useful life. In addition to higher heat, worm reducers can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm_reducerAGknx X & H

The AGknx X & H worm gear reducer series is a high-performance universal mount worm gear reducer. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China Hot selling AC Three Phase Gear Motor Worm Shaft Reducer with Aluminum Housing with Best Sales

Merchandise Description

If you need to have to customise non-normal gearbox,

we can personalized based on drawings or samples!

Product Description

Produce Details

About Us

Xihu (West Lake) Dis. HangZhou Reducer Co., Ltd. is a national massive-scale company, a national second-amount organization, a national superior organization in area administration, and 1 of the 500 premier equipment sector enterprises in China. Our organization has more than a hundred sets of generation tools for a variety of sorts of reducers, and the items are divided into a lot more than a dozen groups and hundreds of designs.

Mainly including WH collection arc cylindrical worm reducer, CW sequence arc cylindrical worm reducer, SCW shaft-mounted arc tooth worm equipment reducer, WD WS collection cylindrical worm reducer, SWL series JWM sequence worm equipment elevate, plane secondary envelope toroidal worm reducer, TP sequence envelope worm reducer, PW collection envelope reducer, CW collection modular reducer, ZQQH ZQSH ZD ZL ZS Z Cylindrical equipment reducer, ZDY ZLY Design and growth of ZSY tough tooth surface gear reducer, X/B collection planetary cycloidal needle wheel reducer, 8000 series planetary cycloidal reducer and other non-regular items.

Our factory has a complete high quality, environment, occupational CZPT and basic safety 3 major administration technique assortment certification, and has a large amount of sophisticated tools and tests devices at house and abroad this sort of as Niles forming and grinding equipment imported from Germany, OKUMA horizontal machining centre, equipment testing heart and coordinate measuring instrument imported from Japan.

RFQ

Q:What info need to I tell you to validate velocity reducer?

A: Product/Measurement, Transmission Ratio, Shaft directions & Order quantity.

 

Q:What if I don’t know which gear reducer I need?

A:Do not fear, Send as considerably details as you can, our group will aid you uncover the appropriate 1 you are looking for.

 

 

Q:What is the MOQ?

A: It is Ok for 1 or modest parts trial purchase for quality screening.

 

Q:Who I should contact?

A:Please make contact with Hao Zhang if you need to have a lot more support.

 

Q:How lengthy ought to I wait for the comments soon after I send the inquiry?

A: Inside 12 hrs

 

Q:What is the payment expression?

A:You can shell out through T/T(30% in progress+70% before delivery), L/C ,West Union etc

 

Q:What is the delivery time?

A:Generally is 20-30days after buy, for special design or large amount remember to electronic mail to us for examining.

 

Q:What is the guarantee time?

A:12months

Is a worm gear reducer right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer is right for your application, you’ve come to the right place. This gear reducer is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm_reducer

This is a reducer

Worm reducer is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducers require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducers produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducers, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducers are an excellent choice for applications requiring high torque and low speeds. These reducers are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducers are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducers are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducers are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducers have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm_reducer

It is high efficiency

When a worm reducer is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer is typically much hotter than a hypoid reducer, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducers are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducers have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer can produce the same amount of output as a 1/2 HP hypoid reducer. A Nissei Corporation study compared the two types of reducers, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer.
The efficiency of a worm gear reducer depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer also have an impact on its efficiency. As a result, worm gear reducers should be used with the right type of lubricant.
In a worm gear reducer, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer is also quiet and has a low friction coefficient.

It has a low clearance

Worm Reducers are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm_reducer

It has a high torque to weight ratio

The worm gear reducer is a versatile gear train that provides a high torque-to-weight ratio. These reducers are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducers are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducers, worm gear reducers are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducers are one of the most popular types of reducers. It provides high torque and high speed ratio in a compact package. These reducers are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducers come in a variety of shapes and sizes, including parallel shaft reducers and planetary worm reducers. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China best KA47 gearbox transmission gearbox travelling reducer stepless gear transmission worm screw jack smr shaft mounted reducer with high quality

Warranty: 1 year
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company
Weight (KG): 35 KG
Customized support: OEM, ODM, OBM
Gearing Arrangement: Helical
Output Torque: 800~100000N.m
Input Speed: 1400rpm
Output Speed: 14-280rpm
Ratio: 7.5~100
Certification: ISO9001-2008
Mount Position: Foot Mounted
Bearing: LYC,SKF
Packaging Details: Wooden boxes , Cantons packed in 1 pallet

Specification itemvalueWarranty1 yearApplicable IndustriesHotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, DIFFERENTIAL ASSY truck gearbox parts for CZPT Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising CompanyCustomized supportOEM, ODM, OBMGearing ArrangementHelicalOutput Torque800~100000N.mInput Speed1400rpmOutput Speed14-280rpmPlace of OriginChinaBrand NameSanLianRatio7.5~100CertificationISO9001-2008Mount PositionFoot MountedBearingLYC,SKF Packing & Delivery Wooden boxes , Cantons packed in 1 palletUSE IN Company Profile Founded in 2015, HangZhou Xihu (West Lake) Dis. Imp. & Exp. Co., Ltd is a professional trade company of reducer, Our company covers an area of 40,000 square meters and there are 800 employees, 20% of whom are technicians. We are well equipped with 300 sets of advanced CNC lathe, machining centers, German HOFLER forming gear grinding machine and advanced detection equipment. We commit ourselves to provide clients with perfect products and service. Our products exported to more than 30 countries in America, Europe, Asia, Middle East and Africa, are enjoying high reputation over the world. FAQ 1. who are we?We are based in ZHangZhoug, China, start from 2015,sell to Southeast Asia(25.00%),Western Europe(20.00%),Africa(15.00%),Central America(15.00%),Southern Europe(13.00%),South America(5.00%),South Asia(4.00%), cnc machine spare parts wholesale cnc lathe machine parts and components Northern Europe(2.00%),Domestic Market(60.00%),Eastern Asia(20.00%),Mid East(10.00%),Eastern Europe(5.00%),Oceania(5.00%). There are total about 11-50 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Gearbox,Gear,Forging,Transmission chains & sprockets and other transmission parts4. why should you buy from us not from other suppliers?HangZhou Xihu (West Lake) Dis. Imp. & Exp. Co., Ltd is the subcompany of CZPT Transmission Machinery Co., Ltd.. It is a professional manufacturer of gearbox for more than 31 years.and 1 step source for transmission produces.5. what services can we provide?Accepted Delivery Terms: FOB,CFR,CIF；Accepted Payment Currency:USD,EUR;Accepted Payment Type: T/T,L/C,MoneyGram,PayPal,Western Union;Language Spoken:English,Chinese VR Exhibition Contact Us Title goes here.Hi My Friend,I am Shadow Lin, will serving your for reducers and transmission parts in future!Don’t worry if you don’t know how to choose！Our have a group help you to choose!Don’ Enclosed China electric drive gear motor speed reducer gearbox t worry if you want to customized!Our have a design group help to count and design.

What Is a Gearbox?

There are several factors to consider when choosing a gearbox. Backlash, for example, is a consideration, as it is the angle at which the output shaft can rotate without the input shaft moving. While this isn’t necessary in applications without load reversals, it is important for precision applications involving load reversals. Examples of these applications include automation and robotics. If backlash is a concern, you may want to look at other factors, such as the number of teeth in each gear.
gearbox

Function of a gearbox

A gearbox is a mechanical unit that consists of a chain or set of gears. The gears are mounted on a shaft and are supported by rolling element bearings. These devices alter the speed or torque of the machine they are used in. Gearboxes can be used for a wide variety of applications. Here are some examples of how gearboxes function. Read on to discover more about the gears that make up a gearbox.
Regardless of the type of transmission, most gearboxes are equipped with a secondary gear and a primary one. While the gear ratios are the same for both the primary and secondary transmission, the gearboxes may differ in size and efficiency. High-performance racing cars typically employ a gearbox with two green and one blue gear. Gearboxes are often mounted in the front or rear of the engine.
The primary function of a gearbox is to transfer torque from one shaft to another. The ratio of the driving gear’s teeth to the receiving member determines how much torque is transmitted. A large gear ratio will cause the main shaft to revolve at a slower speed and have a high torque compared to its counter shaft. Conversely, a low gear ratio will allow the vehicle to turn at a lower speed and produce a lower torque.
A conventional gearbox has input and output gears. The countershaft is connected to a universal shaft. The input and output gears are arranged to match the speed and torque of each other. The gear ratio determines how fast a car can go and how much torque it can generate. Most conventional transmissions use four gear ratios, with one reverse gear. Some have two shafts and three inputs. However, if the gear ratios are high, the engine will experience a loss of torque.
In the study of gearbox performance, a large amount of data has been collected. A highly ambitious segmentation process has yielded nearly 20,000 feature vectors. These results are the most detailed and comprehensive of all the available data. This research has a dual curse – the first is the large volume of data collected for the purpose of characterization, while the second is the high dimensionality. The latter is a complication that arises when the experimental gearbox is not designed to perform well.
gearbox

Bzvacklash

The main function of a gearhead is to multiply a moment of force and create a mechanical advantage. However, backlash can cause a variety of issues for the system, including impaired positioning accuracy and lowered overall performance. A zero backlash gearbox can eliminate motion losses caused by backlash and improve overall system performance. Here are some common problems associated with backlash in gearheads and how to fix them. After you understand how to fix gearbox backlash, you’ll be able to design a machine that meets your requirements.
To reduce gearbox backlash, many designers try to decrease the center distance of the gears. This eliminates space for lubrication and promotes excessive tooth mesh, which leads to premature mesh failure. To minimize gearbox backlash, a gear manufacturer may separate the two parts of the gear and adjust the mesh center distance between them. To do this, rotate one gear with respect to the fixed gear, while adjusting the other gear’s effective tooth thickness.
Several manufacturing processes may introduce errors, and reducing tooth thickness will minimize this error. Gears with bevel teeth are a prime example of this. This type of gear features a small number of teeth in comparison to its mating gear. In addition to reducing tooth thickness, bevel gears also reduce backlash. While bevel gears have fewer teeth than their mating gear, all of their backlash allowance is applied to the larger gear.
A gear’s backlash can affect the efficiency of a gearbox. In an ideal gear, the backlash is zero. But if there is too much, backlash can cause damage to the gears and cause it to malfunction. Therefore, the goal of gearbox backlash is to minimize this problem. However, this may require the use of a micrometer. To determine how much gearbox backlash you need, you can use a dial gauge or feeler gauge.
If you’ve been looking for a way to reduce backlash, a gearbox’s backlash may be the answer. However, backlash is not a revolt against the manufacturer. It is an error in motion that occurs naturally in gear systems that change direction. If it is left unaccounted for, it can lead to major gear degradation and even compromise the entire system. In this article, we’ll explain how backlash affects gears and how it affects the performance of a gearbox.

Design

The design of gearboxes consists of a variety of factors, including the type of material used, power requirements, speed and reduction ratio, and the application for which the unit is intended. The process of designing a gearbox usually begins with a description of the machine or gearbox and its intended use. Other key parameters to consider during gearbox design include the size and weight of the gear, its overall gear ratio and number of reductions, as well as the lubrication methods used.
During the design process, the customer and supplier will participate in various design reviews. These include concept or initial design review, manufacturing design validation, critical design review, and final design review. The customer may also initiate the process by initiating a DFMEA. After receiving the initial design approval, the design will go through several iterations before the finalized design is frozen. In some cases, the customer will require a DFMEA of the gearbox.
The speed increaser gearboxes also require special design considerations. These gearboxes typically operate at high speeds, causing problems with gear dynamics. Furthermore, the high speeds of the unit increase frictional and drag forces. A proper design of this component should minimize the effect of these forces. To solve these problems, a gearbox should incorporate a brake system. In some cases, an external force may also increase frictional forces.
Various types of gear arrangements are used in gearboxes. The design of the teeth of the gears plays a significant role in defining the type of gear arrangement in the gearbox. Spur gear is an example of a gear arrangement, which has teeth that run parallel to the axis of rotation. These gears offer high gear ratios and are often used in multiple stages. So, it is possible to create a gearbox that meets the needs of your application.
The design of gearboxes is the most complex process in the engineering process. These complex devices are made of multiple types of gears and are mounted on shafts. They are supported by rolling element bearings and are used for a variety of applications. In general, a gearbox is used to reduce speed and torque and change direction. Gearboxes are commonly used in motor vehicles, but can also be found in pedal bicycles and fixed machines.
gearbox

Manufacturers

There are several major segments in the gearbox market, including industrial, mining, and automotive. Gearbox manufacturers are required to understand the application and user industries to design a gearbox that meets their specific requirements. Basic knowledge of metallurgy is necessary. Multinational companies also provide gearbox solutions for the power generation industry, shipping industry, and automotive industries. To make their products more competitive, they need to focus on product innovation, geographical expansion, and customer retention.
The CZPT Group started as a small company in 1976. Since then, it has become a global reference in mechanical transmissions. Its production range includes gears, reduction gearboxes, and geared motors. The company was the first in Italy to achieve ISO certification, and it continues to grow into one of the world’s leading manufacturers of production gearboxes. As the industry evolves, CZPT focuses on research and development to create better products.
The agriculture industry uses gearboxes to implement a variety of processes. They are used in tractors, pumps, and agricultural machinery. The automotive industry uses gears in automobiles, but they are also found in mining and tea processing machinery. Industrial gearboxes also play an important role in feed and speed drives. The gearbox industry has a diverse portfolio of manufacturers and suppliers. Here are some examples of gearboxes:
Gearboxes are complex pieces of equipment. They must be used properly to optimize efficiency and extend their lifespan. Manufacturers employ advanced technology and strict quality control processes to ensure their products meet the highest standards. In addition to manufacturing precision and reliability, gearbox manufacturers ensure that their products are safe for use in the production of industrial machinery. They are also used in office machines and medical equipment. However, the automotive gearbox market is becoming increasingly competitive.

China best KA47 gearbox transmission gearbox travelling reducer stepless gear transmission worm screw jack smr shaft mounted reducer with high qualityChina best KA47 gearbox transmission gearbox travelling reducer stepless gear transmission worm screw jack smr shaft mounted reducer with high quality